B.C 1303232, C1 Building, AFZ, UAE+971 50 349 8566info@oozechem.com
Gas processing and separation

Oxygen Generation

Our molecular sieve adsorbents give manufacturers and operators of oxygen generators an efficient way to separate nitrogen and moisture from air, producing high-purity oxygen through Pressure Swing Adsorption (PSA) or Vacuum Pressure Swing Adsorption (VPSA). Stock in the UAE means fast delivery and strong technical support for OEMs, medical plants and industrial gas systems.

Industrial gas purification tower with blue valves
Overview

How oxygen is purified by PSA

An oxygen generator converts ambient air into an oxygen-enriched gas. Compressed, filtered and dried air passes through a column of molecular sieve, which adsorbs nitrogen, carbon dioxide and water while letting oxygen pass through.

Compared with cryogenic separation, adsorption is a competitive and cost-effective route to oxygen — typically 94–95% pure — which is why it is the standard for medical concentrators and on-site industrial supply.

Key points
Air is compressed, dried and filtered before entering the PSA vessels
The sodium X-type sieve captures N₂, CO₂ and moisture
Oxygen passes through and is collected at 93–95% purity
Pressure is released to regenerate the bed for the next cycle
Recommended products

Grades we supply for oxygen generation

Specifications

Typical oxygen-grade sieve properties

PropertyValue / range
Type13X, Lithium X (LiX), 5A optional
ShapeSpherical beads or cylindrical pellets
Diameter0.4–0.8 mm (small concentrators) / 1.6–2.5 mm (large plants)
Bulk density0.60–0.68 g/cm³
Crush strength≥ 80 N (average)
N₂ adsorption (25 °C, 760 mmHg)≥ 11.0–11.5 mL/g
O₂ purity achievable93–95% (system dependent)
Operating pressureTypically 4–8 bar
Cycle stability> 10,000 cycles under standard PSA
Loss on attrition< 0.1%
Moisture adsorption≥ 20% weight

Typical values. Lot-specific results are stated on the certificate of analysis supplied with every shipment.

Why it works

High nitrogen adsorption capacity for stable purity
Excellent cycle stability and low attrition
Bead sizes for portable concentrators and large plants
Technical support to tune PSA design and cycle times

Where it is used

Medical oxygen generators in hospitals, clinics and EMS units
Industrial oxygen for welding, combustion and metallurgy
Portable and on-site oxygen concentrators
Biogas upgrading and air separation units
IndustriesAir Purification
Gas processing and separation

Related applications

Nitrogen GenerationCarbon molecular sieve for on-site PSA nitrogen at 95–99.999% purity.ExploreNatural Gas Drying3A, 4A and 5A sieve for pipeline-dry gas and dew points down to –100 °C.ExploreNatural Gas Separation13X sieve for removing H₂O, CO₂ and H₂S from raw and sour gas.ExploreCarbon Dioxide RemovalMolecular sieve that traps CO₂ from air, natural gas and cracked gas.Explore
Technical support

Tell us the duty. We will specify the grade.

Share the stream composition, flow and target specification. We reply with a grade recommendation, bed sizing guidance and a delivered price within one business day.

Laboratory technician testing a chemical sample